6-S7
L4400 , WSM
FRONT AXLE
Axial Sway of Front Wheel
1. Jack up the front side of tractor.
2. Set a dial gauge on the outside of rim.
3. Turn the wheel slowly and read the runout of rim.
4. If the runout exceeds the factory specifications, check the
bearing, rim, and front wheel hub.
W1012176
Front Axle Rocking Force (2WD)
1. Jack up the front side of tractor.
2. Set a spring balance to the front axle flange.
3. Measure the front axle rocking force.
4. If the measurement is not within the factory specifications, adjust
the adjusting screw (1).
5. Tighten the lock nut (2) firmly.
(When reassembling)
W1012289
Adjusting Front Axle Pivot (4WD)
1. Jack up the tractor body, then loosen the lock nut (2).
2. Measure the adjusting screw tightening torque.
3. If tightening torque is not within the factory specifications, adjust
the adjusting screw (1).
4. After adjustment, tighten the lock nut firmly.
(When reassembling)
W1018685
Axial sway of front wheel
Factory spec.
Less than 5.0 mm
0.20 in.
Front axle rocking force
Factory spec.
49.0 to 117.7 N·m
5.0 to 12.0 Kgf·m
11.0 to 26.5 lbs
Tightening torque
Lock nut
34.3 to 39.2 N·m
3.5 to 4.0 Kgf·m
17.4 to 20.2 ft-lbs
(1) Adjusting Screw
(2) Lock Nut
Tightening torque
Front axle adjusting screw
19.6 to 29.4 N·m
2.0 to 4.0 Kgf·m
14.5 to 21.7 ft-lbs
Lock nut
39.2 to 58.8 N·m
4.0 to 6.0 Kgf·m
28.9 to 43.4 ft-lbs
(1) Adjusting Screw
(2) Lock Nut
KiSC issued 07, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland