manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 99

2

Before making copies

2-26

C250

Be

fo

re

 m

a

king

 c

o

p

ie

s

Chapter 2

!

Detail 

When the control panel is turned on by pressing the [Power] (auxiliary 
power) button, the indicator on the [Start] key lights up in orange, and a 
screen indicating that the machine is starting up appears.

After a few seconds, the message “Now warming up. Ready to scan.” ap-
pears on the touch panel, and the indicator on the [Start] key lights up in 
green, indicating that a job can now be queued.

The default settings are those that are selected immediately after the ma-
chine is turned on (the power switch is set to “

n

”) and before any setting 

is specified from the control panel or touch panel, and those that are se-
lected when the [Reset] key is pressed to cancel all settings specified 
from the control panel or touch panel. The default settings can be 
changed. For details, refer to “Initial setting” on page 12-19.

The factory default settings are the settings that were selected when this 
machine was sent from the factory.

2

Note 

A job can also be queued while the machine is warming up after the 
[Power] (auxiliary power) key is pressed. For details, refer to “To scan dur-
ing warm-up” on page 2-27.
After the machine has finished warming up, the scanned image will be 
printed.
The machine takes about 110 seconds to warm up at normal room tem-
perature (23°C) when the control panel is turned on using the [Power] 
(auxiliary power) key after the machine is turned on using the main power 
switch.

c250.book  Page 26  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands