manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 200

Basic copy operations

3

C250

3-67

Basic copy op

er

at

ions

Chapter 3

1

In the Basic screen, touch [Finishing].

The Finishing screen appears.

2

Touch [Sort].

–

To separate each set of copies, touch [Offset].

3

Touch [OK].

The Basic screen appears again.

Separating copies by pages (“Group” setting)

0

The default setting is “Group”.

0

If “Offset” is selected while no finisher is installed, printed copies will be 
fed out and sorted in an alternating crisscross pattern if the following 
conditions are met.

0

A4- or B5-size paper is used.

0

Paper of the same size and type is loaded with the 

w

 orientation in one 

paper tray and with the 

v

 orientation in another tray.

0

The “Auto Paper Select” setting is selected.

0

The “Auto Paper Select” setting is not selected when the “Mixed Original” 
setting is selected.

0

If “Offset” is selected while a finisher is installed, printed copies are fed 
out and stacked on top of each other with each set shifted to separate it.

c250.book  Page 67  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands