Konica Minolta BIZHUB C250 User Manual Download Page 71

Page: 71 / 600

Installation and operation precautions

1-16

C250

sta

llat

ion

per

ion

Chapter 1

1.3

Caution notations and labels

Safety precaution notations and labels appear on this machine at the follow-
ing positions.

Be very careful that an accident does not occur when operations such as re-
moving paper misfeeds are performed.

It is illegal to copy
certain types of
documents. Never
copy such documents.

Do not alter or remove
any covers or panels
attached to this
machine, otherwise
you may be exposed
to laser radiation.

Do not burn used
imaging units. Toner
expelled from the fire
is dangerous.

Do not burn used
toner cartridges.
Toner expelled from
the fire is dangerous.

CAUTION

WARNING

Do not burn the used
waste-toner box.
Toner expelled from
the fire is dangerous.

CAUTION

Do not position the used
waste-toner box so that
it is standing on end or
tilted, otherwise toner
may spill.

WARNING

The area around the
fusing unit is extremely
hot. Touching any part
other than those
indicated may result in
burns.

CAUTION

c250.book Page 16 Tuesday, April 4, 2006 11:33 AM

Summary of Contents for BIZHUB C250
























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BIZHUB C250

Reviews:

Brands by name

Popular brands

Konica Minolta BIZHUB C250, User Manual

Search results

Summary of Contents for BIZHUB C250

Reviews:

Brands by name

Popular brands