manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 557

12

Utility

12-70

C250

Utility

Ch

ap

te

r 12

!

Detail 

For details on external server authentication, refer to the User’s Guide 
[Network Scanner Operations].

If both user authentication and account track settings have been applied, 
“Account Track Input Method” is set to “Account Name & Password”.

A public user can be set to provide temporary access to this machine. If 
public user access is permitted, we recommend placing limitation on the 
machine functions that can be used. For details, refer to “User registra-
tion” on page 12-76.

If account track settings have been applied while “User Authentication” 
is set to “ON (External Server)”, type in the user name and password in 
the user authentication screen, and then type in the account name and 
password in the account track screen.

If “ON (MFP)” is set and “Account Track” is set to “ON”, but the corre-
sponding account was not specified when the user was registered, user 
authentication and account track information must be entered each time 
that the machine is used, even if “Synchronize User Authentication & Ac-
count Track” has been set to “Synchronize”.

If “Synchronize User Authentication & Account Track” was set to “Do Not 
Synchronize”, use by a public user is not permitted.

c250.book  Page 70  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands