manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 100

Before making copies

2

C250

2-27

Be

fo

re

 m

a

king

 c

o

p

ie

s

Chapter 2

To scan during warm-up

1

Press the [Power] (auxiliary power) button.

The indicator on the [Start] key lights up in orange.

?

How is the machine turned on?

%

For details on turning on the machine, refer to “To turn on the ma-
chine” on page 2-25.

2

Check that the message “Now warming up. Ready to scan.” appears 
on the touch panel.

–

After the warm-up message is displayed, the Basic screen appears.

The indicator on the [Start] key lights up in green.

3

Position the document to be copied.

?

How is the document positioned?

%

For details on positioning the document to be copied, refer to 
“Feeding the document” on page 3-7.

4

Specify any necessary copy settings.

5

Using the keypad, specify the desired number of copies.

?

How is the number of copies specified?

%

For details on specifying the number of copies, refer to “General 
copy operation” on page 3-2.

6

Press the [Start] key.

The document is scanned, and the job is added to the list of queued 
jobs.

7

Check that the document has finished being scanned, and then posi-
tion the next document.

c250.book  Page 27  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands