Konica Minolta BIZHUB C250, User Manual

Page: 592 / 600

Appendix
13
C250 13-7
Appe
nd
ix
Ch
apt
e
r 13
Fold & Staple
Set this function to fold the copies in half and staple them together at the
center.
Finishing
Select from the settings that are available for sorting and finishing copies
when they are fed into the copy exit tray.
G
Glossy
Select this setting to print with a glossy finish.
Green
Set this parameter to adjust the level of green in the image, for example, if
you wish to emphasize the green of forests and trees.
Group
Select this setting to separate the copies of each page in the document. The
specified number of copies of the second page is printed after all copies of
the first page are finished.
H
Hue
Set this parameter to make the image either more reddish or more bluish.
I
Insert Image
Set this function to later scan multiple images from the original glass and in-
sert them at the desired locations in a document scanned with the ADF, then
feed out all copies together.
Insert Sheet
Set this function to insert paper from the specified paper tray into the copies
as chapter title pages.
M
Margin
Select the setting for the position of the binding margin for the loaded docu-
ment. Selecting the appropriate setting prevents the copy from being printed
upside-down when making double-sided copies from single-sided docu-
ments or when making single-sided copies from double-sided documents.
Memory Scan
Scans a document exceeding the maximum 100 pages that can be loaded
into the ADF by scanning the document in separate batches. The document
can be scanned and treated as a single copy job. In addition, the scanning
location can be switched between the original glass and the ADF during the
scanning operation.
c250.book Page 7 Tuesday, April 4, 2006 11:33 AM