Konica Minolta BIZHUB C250, User Manual

Page: 345 / 600

7
Copy paper/original documents
7-28 C250
C
o
p
y
pa
pe
r/
or
igin
a
l
d
o
c
u
m
e
nts
Chapter 7
Documents that can be placed on the original glass
To copy documents that cannot be loaded into the ADF, position them on
the original glass.
Precautions for positioning documents on the original glass
Observe the following precautions when placing the document on the origi-
nal glass.
- The size of documents printed on paper in inch sizes (such as 11 × 17,
8-1/2 × 14, 8-1/2 × 11) cannot be automatically detected. The setting
must be specified by the technical representative. For details, contact the
technical representative.
- If a document of non-standard paper size is loaded, the “Auto Paper Se-
lect” and “Auto Zoom” settings cannot be used since the document size
cannot be detected automatically. If a document of non-standard paper
size is loaded, select the size of the paper to be copied.
- If highly translucent or transparent documents, such as overhead trans-
parencies or diazo photosensitive paper, are loaded, the document size
cannot be detected automatically. Place a blank sheet of paper of the
same size over the document.
- Do not place objects exceeding 2 kg on the original glass, otherwise the
original glass may be damaged.
- If a book is placed on the original glass, do not press it down extremely
hard, otherwise the original glass may be damaged.
Original Glass Documents
Document type Sheets, books (spreads), three-dimensional objects
Document size A3 w to A5 w
11 × 17 w to 5-1/2 × 8-1/2 w
Maximum weight 2 kg
c250.book Page 28 Tuesday, April 4, 2006 11:33 AM