manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 394

Application functions

8

C250

8-49

App

lica

tio

n f

unct

ions

Chapter 8

8.14

Adjusting the copy color quality (Adjust Color param-
eters)

You can adjust the quality of color copies as desired.

There are 10 Adjust Color parameters that can be used in any combination. 
In addition, you can check the specified settings by printing a sample copy.

!

Detail 

To print a sample copy in order to check the print result with the current 
settings, touch [Sample Copy]. For details about sample copies, refer to 
“Checking the Print Result of the Adjust Color Settings (Sample Copy)” 
on page 8-52.

Setting

Description

Brightness

This parameter can be used to make the image either lighter or dark-
er.

Contrast

This parameter can be used to make the image either crisper or 
smoother.

Saturation

This parameter can be used to adjust the vividness of the colors in 
the image.

Red

This parameter can be used to adjust the level of red in the image.

Green

This parameter can be used to adjust the level of green in the image.

Blue

This parameter can be used to adjust the level of blue in the image.

Hue

The hue is divided into red, blue and yellow. By adjusting the hue, 
the image can be made either more reddish or more bluish.

Copy Density

This parameter can be used to adjust the copy density.

Sharpness

This parameter emphasizes the edges of text so that they can be 
read more easily. In addition, this parameter can be used to make an 
overly sharp image softer or a blurry image clearer.

Color Balance

This parameter can be used to adjust the individual concentrations 
of yellow (Y), magenta (M), cyan (C), and black (K).
• Increasing the amount of yellow and magenta or decreasing the 

amount of cyan increases the red tinge.

• Increasing the amount of yellow and cyan or decreasing the 

amount of magenta increases the green tinge.

• Increasing the amount of magenta and cyan or decreasing the 

amount of yellow increases the blue tinge.

• Increasing the amount of yellow or decreasing the amount of ma-

genta and cyan increases the yellow tinge.

• Increasing the amount of black increases the black tinge.

c250.book  Page 49  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands