manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 108

Before making copies

2

C250

2-35

Be

fo

re

 m

a

king

 c

o

p

ie

s

Chapter 2

4

Using the keypad, type in the length of time until the machine enters 
Sleep mode again.

Specify a length of time between 5 minutes and 9 hours and 59 min-
utes.

?

How can a single digit be input?

%

First, type in “0”. If a minutes setting of less than 5 is entered, the 
setting changes to 5 minutes. In addition, a minutes setting of 60 or 
more cannot be specified. 

5

Touch [OK].

The message “Ready to copy.” appears on the touch panel.

2

Note 

As the factory default, the weekly timer is not set.

If the message “Access restricted due to weekly timer. Input amount of 
time prior to entering Sleep Mode.” or “Access restricted due to weekly 
timer. Input password to interrupt timer.” appears after the [Power] (aux-
iliary power) key is pressed, the weekly timer is set.

!

Detail 

During the set time, the copy operations can be performed as usual.

From the Password for Non-Business Hours screen (displayed from Ad-
ministrator mode), the machine can be set so that the screen for entering 
the password for non-business hours is not displayed.

The default setting for the “Password for Non-Business Hours” parame-
ter is “OFF” (the screen is not displayed).

c250.book  Page 35  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands