manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 508

Utility

12

C250

12-21

Utility

Ch

ap

te

r 12

2

Note 

If the “Administrator Security Level” parameter in Administrator mode 
was set, [Auto Zoom (Platen)], [Auto Zoom (ADF)], [Select Tray when APS 
OFF], and [Select Tray for Insert Sheet] do not appear.

If the “Administrator Security Level” parameter in Administrator mode 
was set to “Level 2”, [Print Jobs During Copy Operation] does not ap-
pear.

Set for Incorrect AMS Di-
rection

Select whether or not printing continues 
when the paper and document orienta-
tions are different with the “Auto Paper 
Select” setting selected.
• Print:

The Zoom setting is automatically set 
and the copy is printed on paper of 
the specified size in the specified ori-
entation.

• Delete Job:

The job is deleted, and no copies are 
printed.

Print

Auto Zoom (Platen)

Select whether or not a Zoom setting is 
automatically selected when a paper 
tray is selected (except when “Auto Pa-
per Select” is set) while a document is 
placed on the original glass.

OFF

Auto Zoom (ADF)

Select whether or not a Zoom setting is 
automatically selected when a paper 
tray is selected (except when “Auto Pa-
per Select” is set) while a document is 
loaded into the ADF.

ON

Select Tray when APS 
OFF

Select which paper tray is selected when 
the “Auto Paper Select” setting is can-
celed.
• Tray Before APS ON:

The paper tray that was being used 
before the “Auto Paper Select” setting 
was selected is selected.

• Default Tray:

The 1st tray is used.

Tray Before APS ON

Select Tray for Insert 
Sheet

Select the default paper tray loaded with 
paper for the cover pages, inserted pag-
es and chapter title pages.

Tray 2

Print Jobs During Copy 
Operation

Select whether or not print data or fax 
data can be accepted for printing while a 
copy operation is being performed.
• Accept:

Print data and fax data can be accept-
ed and printed.

• Receive Only:

Print data and fax data is printed after 
the copy operation is finished.

Accept

Parameter

Description

Default Setting

c250.book  Page 21  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands