manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 232

Additional copy operations

4

C250

4-17

Addit

ion

al copy op

era

tions

Chapter 4

4.6

Displaying function descriptions (Help)

Descriptions of the various functions and details of operations can be 
viewed.

There are two methods for displaying the Help screens.

-

Main Help Menu screen (from the Basic screen)

-

Setting Help screens (from screens other than the Basic screen)

Overview of Help Screens

The Help feature provides of the following menus.

Main Help Menu screen (1st level)

!

Detail 

Items in the Main Help Menu and the Help Menu screens can be selected 
by touching the button or by pressing the key in the keypad for the 
number of the desired item.

To display the next screen higher in the menu structure, touch [ 

].

Touch [Exit] to quit the Help mode and return to the screen that was dis-
played before the [Help] key was pressed.

Item

Description

[Copy], [Scan], [Fax], [Box], 
[Job List], [Banner Printing]

Displays the Help menu for the corresponding mode

[Name and function of each 
part]

Displays the Help menu for the name and function of each part
Use to check the description of the main unit and its options.

[Service/Administrator 
Information]

Displays the name, extension number and e-mail address of 
the administrator

c250.book  Page 17  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands