manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 573

12

Utility

12-86

C250

Utility

Ch

ap

te

r 12

8

Touch [Password].

–

If “Account Track Input Method” was set to “Password Only”, the 
same password cannot be registered more than once.

The Password screen appears.

9

Type in the password (up to 8 characters), and then touch [OK].

A screen for retyping the password appears.

10

Retype the password specified in step 9, and then touch [OK].

The account password is set.

11

Touch [Output Permission].

The Output Permission screen appears.

12

Beside “Print” and “Send”, touch the button for the desired settings.

–

To permit outputting by the account, touch [Allow].

–

To prohibit outputting by the account, touch [Restrict].

–

Touch [All Accounts] to apply the settings in the current screen to 
all registered accounts. Touch [All Accounts], and then touch [OK] 
in the two screens that appear to display a message and apply the 
settings to all accounts. At this time, do not turn off the machine 
with the main power switch.

–

If “Color” of the “Print” is set to “Restrict”, printing is not possible 
with the “Full Color”, “2 Color” or “Single Color” settings.

–

If “Black” of the “Print” is set to “Restrict”, printing is not possible 
with the “Black” setting.

–

If both “Color” and “Black” of the “Print” are set to “Restrict”, the 
message “Copy is prohibited.” appears if authentication was com-
pleted correctly.

–

If “Color” is set to “Restrict” under “Send”, color scanning is not 
possible.

c250.book  Page 86  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands