Konica Minolta BIZHUB C250, User Manual

Page: 202 / 600

Basic copy operations
3
C250 3-69
Basic copy op
er
at
ions
Chapter 3
Stapling copies (Staple settings)
!
Detail
In order for the copies to be stapled, all of the following conditions must
be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
If the “Mixed Original” setting is selected, all copies must have the same
paper width.
If a Staple setting is selected, the “Sort” setting is automatically selected.
A Staple setting cannot be used together with the “Offset” setting.
If a Staple setting is to be selected, select the orientation in which the
document is positioned and the orientation of the page to be stapled,
otherwise the copies may not be stapled as desired.
For details on specifying the document orientation, refer to “Selecting the
document orientation (Original Direction settings)” on page 3-21.
When Finisher FS-603 is installed
Paper Weight Paper Size Loading Capacity (detected with ei-
ther measurement)
60 g/m
2
to
90 g/m
2
A4 w / v , B5 w / v 1,000 sheets 150 mm
A3 w , B4 w 500 sheets 75 mm
Number of Bound
Pages Maximum Number of Sets
One place
towards the
back One place
towards the
front Two places
A4 w or
smaller
2 sheets 100 sets 40 sets 40 sets
3 to 5 sheets 80 sets 40 sets 40 sets
6 to 10 sheets 60 sets 40 sets 40 sets
11 to 20 sheets 30 sets 30 sets 30 sets
21 to 30 sheets 30 sets 30 sets 30 sets
31 to 50 sheets 30 sets/1,000
sheets 30 sets/1,000
sheets 30 sets/1,000
sheets
c250.book Page 69 Tuesday, April 4, 2006 11:33 AM