Konica Minolta BIZHUB C250, User Manual

Page: 528 / 600

Utility
12
C250 12-41
Utility
Ch
ap
te
r 12
!
Detail
The operation of the “Prohibit Functions when Auth. Error” parameter is
performed with the following passwords.
User authentication passwords, account track passwords, box pass-
words, passwords for confidential documents, and the administrator
password
If the control panel cannot be operated even after touching [Release]
from the “Prohibit Functions when Auth. Error” parameter to specify the
items whose operation restrictions are canceled or if operation is prohib-
ited from a failed attempt to authenticate the administrator password, re-
start the machine.
2
Reminder
When the machine is turned off, then on again with the main power
switch, wait at least 10 seconds to turn the machine on after turning it off.
The machine may not operate correctly if it is turned on immediately after
being turned off.
Enhanced Security Mode
HDD Setting
Description
Settings necessary for applying the Enhanced Security mode appear. Select whether or not to
apply enhanced security settings when the necessary settings are specified. For details, contact
your technical representative.
Parameter Description Default Setting
Check HDD Capacity Specify settings for using boxes. For details, refer to the Box Oper-
ations of the User’s Guide.
Temporary Data Over-
write Setting Select whether or not image data is temporar-
ily written to the hard disk with all operations
for copying, scanning, faxing and computer
printing. For details on the settings, refer to
the User’s Guide [Box Operations]. By speci-
fying a setting on the Temporary Data Over-
write Setting screen, the area of the hard disk
where image data is saved can be overwritten
after the data is printed or sent, and the data
can be erased. This process prevents disclo-
sure of image data on the hard disk. OFF
c250.book Page 41 Tuesday, April 4, 2006 11:33 AM