manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 414

Application functions

8

C250

8-69

App

lica

tio

n f

unct

ions

Chapter 8

–

To also specify settings for Application functions “Cover Mode”, 
“Insert Sheet” and “Chapters”, touch [Insert Sheet Setting], and 
then select the settings for the pages to be printed.

–

Blank pages inserted using the “Cover Mode”, “Insert Sheet” and 
“Chapters” functions are only counted, but page numbers are not 
printed on them.

–

If “Except for Front Cover” or “Do Not Print Page #” is selected un-
der “Cover Mode”, page numbers are printed starting with “2” in 
single-sided copies and starting with “3” in double-sided copies.

–

If “Do Not Print Page #” is selected, inserted pages are only count-
ed, but page numbers are not printed on them. If “Skip the page(s)” 
is selected, inserted pages are not counted and page numbers are 
not printed on them.

?

What are the limits on the adjustment amount?

%

The print position can be finely adjusted in 0.1 mm increments.

?

Can no adjustments be made?

%

To make no left/right or up/down adjustments, touch [No Adj.].

?

What happens when a value outside of the allowable range is spec-
ified?

%

The message “Input Error” appears. If “Input Error” appears or if the 
adjustment value was incorrectly entered, touch [No Adj.] or press 
the [C] (clear) key, and then specify the correct value.

7

Touch [OK], and then touch [OK] in the next screen that appears.

The Stamp screen appears again.

8

If necessary, specify any other copy settings.

9

Using the keypad, type in the desired number of copies.

10

Press the [Start] key.

c250.book  Page 69  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands