Konica Minolta BIZHUB C250 User Manual Download Page 362

Page: 362 / 600

Application functions

C250

8-17

App

lica

tio

n f

unct

ions

Chapter 8

To copy using the “Chapters” function

Make sure that the paper loaded for the first page of the chapter and for the
copy have the same size and orientation.

Position the document to be copied.

–

For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-7.

–

For a document that exceeds 100 pages, refer to “Scanning the
document in separate batches (“Separate Scan” setting)” on
page 3-11.

Touch [Application], and then touch [Sheet/Cover/Chapter Insert].

–

To cancel all settings for the Application functions, touch [Reset].

The Sheet/Cover/Chapter Insert screen appears.

Touch [Chapters].

The Chapters (editing) screen appears.

Using the keypad, specify the first page of the chapters.

–

When [Select] is touched, the entered page is specified.

–

After the page number is specified, the page numbers are arranged
in order, starting with the lowest number.

c250.book Page 17 Tuesday, April 4, 2006 11:33 AM

Summary of Contents for BIZHUB C250
























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BIZHUB C250

Reviews:

Brands by name

Popular brands

Konica Minolta BIZHUB C250, User Manual

Search results

Summary of Contents for BIZHUB C250

Reviews:

Brands by name

Popular brands