manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 506

Utility

12

C250

12-19

Utility

Ch

ap

te

r 12

Copy Screen

Fax Active Screen

Initial setting

2

Reminder 

To change the default settings for Scan mode or Fax mode, press the 
[Scan] or [Fax] key, enter Utility mode, and then select a setting for this 
parameter.

!

Detail 

For details on the default settings and the factory default settings, refer 
to “Automatically canceling the settings (automatic panel reset)” on 
page 2-30.

Parameter

Description

Default Setting

Copy Operating Screen

Select the screen that is displayed while 
printing.
• ON: A copy job can be reserved by 

touching [Next Job Reservation] in the 
screen with the message “Now print-
ing.”, which appears during printing.

• OFF: A copy job can be reserved 

while the Basic screen in Copy mode 
is displayed.

OFF

Parameter

Description

TX Display

Specify settings for faxing. For details, refer to the Facsimile Opera-
tions of the User’s Guide.

RX Display

Description

Default Setting

Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on (the pow-
er switch is set to “

n

”) or the [Reset] key is pressed can be specified.

• Current Setting:

The settings specified from the touch panel before Utility mode 
was entered are set as the default settings for Copy mode.

• Factory Default:

The factory default settings are set as the default settings for 
Copy mode.

Factory Default

c250.book  Page 19  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands