406388/F
277
Description
The
Advanced
dialog box shows the measurements or functions defined in the
corresponding
PX Configurator
dialog box. You can define a minimum and a maximum
range value for every measurement.
Note
Observe that the units used are the standard international units and not those defined
in the
Units
dialog box.
When a catch monitoring sensor takes a measurement outside the range values defined, it
will not be displayed or will present an exception value.
Follow the instructions provided in the dialog box.
Related topics
Sensor List page, page 234
Checking and adjusting the range settings of a measurement, page 147
Select Sensors dialog box
With the
Select Sensors
dialog box you are adding previously configured sensors to the
TV80. The
Select Sensors
dialog box is very useful for analysis purposes.
How to open
The
Select sensors
dialog box is opened from the
Add New Sensor
dialog box. To open the
Add New Sensor
dialog box, select
Add New Sensor
at the bottom of the
Sensor list
page in
the
Installation
dialog box. The
Sensor List
page is located in the
Installation
dialog box.
The
Installation
dialog box is located on the
Setup
menu.
Description
This dialog box is commonly called the “offline” mode for configuring. With the
Select
sensors
dialog box, you are not configuring the catch monitoring sensors.
You must select where to place the sensors on your gear. The gear illustration will show
an icon in the shape of a sensor indicating where the sensor is located. No matter the
sensor you choose, the icon will always be the same.
Before you can read data from the catch monitoring sensors, you must define which
sensors to use, and which measurements they shall provide. You must also define the
communication parameters.
Summary of Contents for Simrad TV80
