Kongsberg Simrad TV80, Reference Manual

Page: 59 / 356

406388/F
57
Procedure
1 Do the following preparations.
a Turn on the computer.
b Make sure that you have administrative rights.
c Switch off any firewall applications.
d Open the operating systems’s Network and Sharing Center , and set the IP
address for the network adapter used to communicate with the transceiver.
•
IP Address
: 192.168.1.30
•
Subnet mask
: 255.255.255.0
2 Install the software.
Installing the TV80 operating software, page 59
3 Install the software license.
Obtaining and installing the software license, page 60
4 Connect the Receiver Unit(s) to the computer.
5 Set up the relevant Receiver Unit(s).
Setting up the interfaces to peripheral devices, page 39
6 Select the gear you wish to use.
Selecting gear, page 68
7 Select one or more catch monitoring sensors, and place them on the chosen gear.
Adding new catch monitoring sensors, page 52
Configuring catch monitoring sensors’ parameters and defining their measurements,
page 137
8 Define the relevant sensor view according to your needs and sensors configuration.
Creating views to see the data provided by the sensors, page 71
9 Open the
Receiver
dialog box to define the parameters related to reception, such
as filter and gain.
Defining receiver parameters for the PI50 and PI60 Receiver Units, page 67
Reducing noise disturbance from the data received on a SR15 or SR70 Receiver
Unit, page 152
10 Open the
Measurements
dialog box to verify that each sensor provides the expected
information.
Checking the sensor readings, page 135
Getting started