Kongsberg Simrad TV80, Reference Manual

Page: 73 / 356

406388/F
71
Creating views to see the data provided by the sensors
Creating a new sensor view
When you edit a view, you can add or remove gauges, resize them and save that view
with a name of your choice. In order to create a new view, you have to edit its content or
its name.
Prerequisites
In order to create a new view or editing its content, you must open the TV80
Designer
.
There is at least one layout created. In this context, the different combinations of views
is called
layout .
Context
In a large system with many sensors in simultaneous use, it can be useful to have
different ways of having the information presented. According to the operating scenario
or your personal preferences, you can choose to edit the content of a view or creating a
new one and apply that selection to your current presentation.
In the TV80 program, the presentation of sensor data is organized in views. You can
choose to have one, two, three or four views at the same time. If you use less than
four views, you can choose their layout according to your operational requirements or
personal preferences. Each view contains one or more “gauges”.
Procedure
1 Select the area you want to create a new view for.
The active view is identified with a thicker border.
2 Move the cursor to the right side of the view.
You may need to hide the main menu or move it
to the left hand side of your presentation. To hide
the menu, select
Menu
on the top bar. To retrieve
the menu, select
Menu
one more time.
The
View
shortcut menu opens.
3 Select
Edit View
.
Getting started