Kongsberg Simrad TV80, Reference Manual

Page: 144 / 356

142
406388/F
7 In the gear illustration, select the location of the sensor.
8 Select the direction the sensor is going to point to, either to the vessel or to the trawl.
9 Choose the measurements you want the sensor to make and define the relevant
parameters.
10 Select the communication
Channel
.
This is specially important if you wish to use several sensors to operate on
different communication channels. This is also important to avoid interference if
several vessels equipped with identical catch monitoring systems are operating
simultaneously in the same area.
11 Select
Calibrate Sensor
.
If you want your sensor to measure the pitch and roll of the trawl doors, you must
calibrate it.
Performing a first time calibration of the roll and pitch measurements of a door
mounted sensor, page 155
12 Select
Program Sensor
to transfer the chosen parameters to the sensor.
13 In the
Sensor list
page, verify if the sensor appears with the correct parameters.
14 Disconnect the sensor from the interface cable and the computer.
Result
The sensor is configured for use.
Related topics
PX Flow Sensor configurator dialog box, page 265
PX MultiSensor Mk2 configuration dialog box, page 260
PX MultiCatch configuration dialog box, page 262
PX Universal configuration dialog box, page 263
Add New Sensor dialog box, page 284
Adding more measurements to a PX family sensor, page 144
Entering the offset values for sensor measurements, page 146
Simrad TV80 Reference Manual