Kongsberg Simrad TV80, Reference Manual

Page: 182 / 356

180
406388/F
Temperature read-out
The navigational information on the top bar includes a read-out of the current water
temperature.
Description
If a suitable sensor is connected to the TV80 system, the top bar may
show you the current temperature. The function is offered to allow you
to monitor the water temperature, but it will display any temperature
reading that is made by the sensor.
Depth read-out
The current water depth may be shown on the top bar.
Description
The TV80 system is unable to read the water depth from any of the catch sensors. To
see a valid depth value on the top bar, you must set up your TV80 system to import
depth information from an echo sounder.
Tip
By default, the depth is shown in metres. You can change the unit of measurement in the
Units
dialog box. The
Units
dialog box is located on the
Display
menu.
Messages button description
Messages
is located on the right side of the top bar.
Description
A new message is flagged with
Messages
on the top bar. It is flashing to draw
your attention. The colour of the triangle reflects the severity of the most
serious message.
•
Yellow
: This indicates a warning.
•
Red
: This indicates an alarm.
If you hold the cursor over the triangle, a short list of the current messages is shown.
Select to open the
Messages
dialog box.
Related topics
Messages dialog box, page 302
Simrad TV80 Reference Manual