Kongsberg Simrad TV80, Reference Manual

Page: 155 / 356

406388/F
153
• The
Interference filter
offers four different settings. The default setting of the
Interference Filter
is Weak .
• The
Sensor Filter
can be used if you have problems with the reception. It
will average the data received from the sensors. After the sensors have been
submerged, the receiver requires only three consecutive pings from individual
sensors to calculate and display their respective information. However, if you
experience problems with the reception, you may try this filter. The
Sensor filter
offers four different settings. The default setting of the filter is Weak .
• The
Catch filter
reduces the jumping between “catch” and “no catch” states. The
Catch filter
offers four different settings. The default setting of the filter is Weak .
• The
Catch/Bottom Filter
is used to restrict the change of state from the catch and
bottom contact sensors. This will reduce jitter in the presentation. The default
setting of the filter is
Weak .
4 Select
OK
to save the selected settings and close the dialog box.
Related topics
Receiver dialog box, page 294
I/O Setup page, page 236
SR Receiver Filtering dialog box, page 219
Operating procedures