406388/F
135
6
Select
OK
to close the
Port Monitor
dialog box.
Related topics
UDP Configuration dialog box, page 304
Serial Port Setup dialog box, page 290
Port Monitor dialog box, page 289
Navigation dialog box, page 242
Checking the sensor readings
Every external equipment connected to the TV80 system offers one or more
measurements.The
Measurements
dialog box displays all the readings the TV80 is
currently receiving from the sensors installed.
Prerequisites
The TV80 system has been set up with its hardware units connected as specified by the
relevant installation instructions. Without a valid license, your TV80 system will not
show real time data from the catch monitoring sensors.
Context
In the
Measurements
dialog box you can easily see all the measurements received in a
specific port and if the TV80 system is validating it. With just a look you can easily
identify all the measurements, the channel the information is coming through and if
the TV80 is acknowledging it.
Procedure
1
On the computer desktop, double-click the TV80 icon to start the program.
2
Select the
Setup
icon to open the menu.
3
On the
Setup
menu, select
Installation
.
4
Observe the
I/O Setup
page on the right side of the
Installation
dialog box.
Every interface is presented as a small "block diagram".
5
Select the inspection point at the left
of the “block diagram” you want to
check.
The
Measurements
dialog box opens.
6
Makes sure that the TV80system
receives information from a specific
sensor.
Summary of Contents for Simrad TV80
