Kongsberg Simrad TV80, Reference Manual

Page: 113 / 356

406388/F
111
4 At the bottom of the
Sensor list
page, select
Add New Sensor
.
The
Add New Sensor
dialog box opens. In the first dialog box, the following options
are provided.
5 Select
Yes
if you have a new sensor that needs to be configured before use.
a In the very first
PX Sensor Configurator
dialog box, select communication port
and sensor type, then select
Connect
.
b In the relevant configuration dialog box, select the operational parameters to
suit your preferences and fishing gear setup.
1 On the gear illustration, select the location of your sensor.
2 Choose the measurements you want your sensor to read and define the
relevant parameters accordingly.
3 Choose the communication channel.
4 Select the update interval.
5 Select the relevant value for output power.
6 If applicable, select
Calibrate Sensor
or
Unlock Measurements
to open the
proper dialog boxes.
c Select
Program Sensor
to transfer the chosen parameters to the sensor.
d Disconnect the sensor from the interface cable and the computer.
e Select
Close
to close the dialog box.
6 Select
No
if one of the following conditions is met:
• The sensor is mounted on the fishing gear.
• The sensor is not a PX family sensor.
• The sensor data is received using a third wire cable on a a FS system.
a Observe that the
Select Sensors
dialog box opens.
b On the gear illustration, select the location of your sensor.
c Define the sensor parameters.
1 Choose the measurements you want your sensor to read and define the
relevant parameters accordingly.
2 Choose the communication channel.
3 Select the update interval.
d Select
Close
to save the chosen settings and close the dialog box.
7 Repeat these steps for the next sensor.
Result
The new sensor appears on the
Sensor List
page.
Operating procedures