Kongsberg Simrad TV80, Reference Manual

Page: 53 / 356

406388/F
51
Related topics
Serial Port Setup dialog box, page 290
Setting up the NMEA output to any external system on an Ethernet
(LAN) port
The TV80 can export sensor NMEA data on a dedicated communication port (serial or
Ethernet).
Prerequisites
• The TV80 software is installed on the Processor Unit.
• The relevant license string for the software is installed and activated.
• You are familiar with NMEA and other relevant datagram formats.
Context
The TV80 can export the sensor information on several NMEA datagram formats.
Procedure
1 Connect the peripheral system to an available communication port on your
computer.
2 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
3 Observe the
I/O Setup
page on the right side of the
Installation
dialog box.
a Select
Add LAN Port
to open the
Select Input (LAN)
dialog box.
4 Select the NMEA icon.
5 Select the LAN port icon in the “block diagram” to open the
NMEA Output
Configuration
dialog box.
6 Set up the relevant communication parameters.
a Enter the
Remote IP Address
for the system (computer or other device) you
want to export the information to.
b Define the
Remote Port
address.
c Select the datagram format to export.
Selecting
PSIMP
your TV80 will output both PSIMP-D1 and PSIMP-F
datagram formats.
Simrad PSIMTV80s a proprietary datagram format created by Kongsberg
Maritime to provide data related to the measurements and location of the
sensors in the gear from the TV80 catch monitoring software.
Getting started