406388/F
69
If you want to add a new sensor to your system and you need to modify its configuration,
the sensor must be connected to the computer with a dedicated cable.
Context
Catch monitoring sensors are delivered from Kongsberg Maritime readily set up with
common default settings. Each individual sensor can be configured to specify its
communication channel, which measurements to make and some other relevant operating
parameters. This is specially important if you wish to use several sensors to operate on
different communication channels. This is also important to avoid interference if several
vessels equipped with identical catch monitoring systems are operating simultaneously
in the same area.
The
Add New Sensor
dialog box starts a "wizard" that permits you to select the specific
catch monitoring sensor you want to put to use. If relevant, the "wizard" provides the
necessary configuration functionality.
Note
The TV80 program only allows you to configure PX sensors. If you wish to use older
sensors (not PX family), these must be configured using their dedicated applications
before you add them.
If your new sensor has already been configured, you do not need to repeat the
configuration process to use it.
The number of sensors you can add depends on your hardware configuration.
Procedure
1
Open the
Setup
menu.
2
On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
3
Observe the
Select Gear
page at the left of the
Installation
dialog box
Select a gear icon according to your working environment.
4
At the bottom of the
Sensor list
page, select
Add New Sensor
.
The
Add New Sensor
dialog box opens. In the first dialog box, the following options
are provided.
5
Select
Yes
if you have a new sensor that needs to be configured before use.
a
In the very first
PX Sensor Configurator
dialog box, select communication port
and sensor type, then select
Connect
.
b
In the relevant configuration dialog box, select the operational parameters to
suit your preferences and fishing gear setup.
1
On the gear illustration, select the location of your sensor.
Summary of Contents for Simrad TV80
