Kongsberg Simrad TV80, Reference Manual

Page: 265 / 356

406388/F
263
Location
When you configure a PX sensor for a purse seine gear, the
Location
parameter
defines at which point from the net shooting start the sensor is located. The defined
location will be visible in the relevant depth gauge.
To add the depth graph to your view, open the
Designer
module and select
Add
On
the
Advanced
tab select
Seine
.
Relevant topics
• Common configuration parameters, page 271
• Non editable information about the sensor, page 274
Related topics
Configuring and setting up the catch monitoring sensors for different measurements,
page 141
Adding more measurements to a PX family sensor, page 144
Overview of sensors channels and frequencies, page 309
Overview of catch monitoring measurements, page 312
PX Universal configuration dialog box
The different
PX Configurator
dialog boxes allow you to set up which measurements the
relevant PX family sensor shall make and which communication channels it shall use
for that measurements. The purpose of the
PX Configurator
dialog box is to be able to
set up any PX family sensors so that several sensors can operate together on different
communication channels.
How to open
The relevant configuration dialog box is opened from the
Add New Sensor
dialog box.To
open the
Add New Sensor
dialog box, select
Add New Sensor
at the bottom of the
Sensor
list
page in the
Installation
dialog box. The
Sensor List
page is located in the
Installation
dialog box. The
Installation
dialog box is located on the
Setup
menu.
Functions and dialog boxes