406388/F
129
Procedure
1
Connect the peripheral system to an available communication port on your
computer.
2
On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
3
Observe the
I/O Setup
page on the right side of the
Installation
dialog box.
a
Select
Add LAN Port
to open the
Select Input (LAN)
dialog box.
4
Select the NMEA icon.
5
Select the LAN port icon in the “block diagram” to open the
NMEA Output
Configuration
dialog box.
6
Set up the relevant communication parameters.
a
Enter the
Remote IP Address
for the system (computer or other device) you
want to export the information to.
b
Define the
Remote Port
address.
c
Select the datagram format to export.
Selecting
PSIMP
your TV80 will output both PSIMP-D1 and PSIMP-F
datagram formats.
Simrad PSIMTV80s a proprietary datagram format created by Kongsberg
Maritime to provide data related to the measurements and location of the
sensors in the gear from the TV80 catch monitoring software.
7
Select
OK
to save the settings and close the parameter dialog box.
Related topics
NMEA Output Configuration dialog box, page 305
Verifying communication with external
sensors and systems
Summary of Contents for Simrad TV80
