Kongsberg Simrad TV80, Reference Manual

Page: 70 / 356

68
406388/F
Selecting gear
The
Select Gear
page allows you to select the type of gear you are going to use.
Context
Every fishing gear can have its own sensors setup. This may proof useful, for example,
if you have two nets, each for different type of fisheries or context. Creating a fishing
gear profile for every net, will help you save a lot of time and efforts whenever you
change operations.
The TV80 allows you to choose from different types of gear.
• Seine
• Single
• Twin trawl
The contents of this page may vary according to the type of license installed.
Procedure
1 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
2 Observe the
Select Gear
page at the left of the
Installation
dialog box
3 Select a gear icon according to your working environment.
Result
In the middle of the
Installation
dialog box, the sensor list shows the sensor setup for
the relevant gear selected.
Related topics
Gear Setup dialog box, page 282
Select Gear page, page 233
Adding new catch monitoring sensors
When you want to put a new catch monitoring sensor to use, you need to add it to the
system. The sensor may or may not need to be configured.
Prerequisites
In order to read the data from a catch monitoring sensor, you must first connect one or
more receivers to the Processor Unit. This procedure assumes that a suitable receiver
unit has been connected to the Processor Unit, and that all relevant communication
parameters have been defined. Without a valid license, your TV80 system will not show
real time data from the catch monitoring sensors.
Simrad TV80 Reference Manual