Kongsberg Seatex Seapath 200, Installation Manual

Page: 48 / 130

Seatex Seapath 200 Installation Manual, rev. 13 Installation
34
Figure 15 Page 3 of GPS Antenna Configuration
9.
Inspect the logged calibration data (in the file "Seapath.cal"
)
for any wild points by
selecting the command
Show Graph
. Correct the wild points found or delete the whole
line(s) and perform a recalculation of the calibration data.
10.
When the Seapath calibration result has been found acceptable, click
Next
to proceed to
page 4. Input the mean value for the vessel heading reference, in this example logged on a
separate PC and found to be 7.83 degrees, and click on
Compute
in order to calculate the
heading offset.