Kongsberg Seatex Seapath 200, Installation Manual

Page: 117 / 130

Seatex Seapath 200 Installation Manual, rev. 13 Appendix D – Seapath configuration software, SCC
103
Figure 60 RTCM Format Decoding
The options for Roll Bytes
are: The options for Bits/Byte are:
MSB First (Roll ON) 6 of 8
LSB First (Roll OFF) 8 of 8
•
To set the Format for Device type "Gyro", click in the gyro
Format
cell and the dialogue
box below appears. Select "<Disabled>", "NMEA HDT" or "Robertson" format. Click
OK
and the selection is finished. The other selections are not recommended used.
Figure 61 Formats available for device type Gyro
8.4.5.4 Output
In the Seapath the following three types of output devices are available:
•
Serial host output ports.
•
Network output ports (not available in Seapath 200 M).
•
Three analog output channels (not available in Seapath 200 M).