Kongsberg Seatex Seapath 200, Installation Manual

Page: 47 / 130

Seatex Seapath 200 Installation Manual, rev. 13 Installation
33
5. In step 2 input 120 minutes (two hours) as the calibration period and the logging interval
as 10 seconds. Log the calibration data to the file "Seapath.cal" on a preferred folder on
the PC.
6.
Before pressing
Next
and start logging of Seapath GPS, it is recommended to start
recording data of the vessel reference heading on another PC or by manual readings.
When logging of the reference heading has started, click
Next
in order to proceed to page
2.
7.
The progress of the calibration process is then shown on the screen with a graphical
presentation of the measured data for the Seapath heading, the gyro compass (if
connected), the antenna baseline length and the height difference.
Figure 14 Page 2 of GPS Antenna Calibration
8.
Click
Next
to proceed to page 3 for information about the calibration result.