Kongsberg Seatex Seapath 200, Installation Manual

Page: 93 / 130

Seatex Seapath 200 Installation Manual, rev. 13 Appendix D – Seapath configuration software, SCC
79
8.3.6 Seapath Control Centre button
The
Seapath Control Centre
button is located below the other tool buttons. Click on the
button to see the folder list below.
Figure 28 Keep Folder List Open
Click the push pin in the upper right corner of the folder list to place this folder on the left
side of the configuration folder. To remove the folder list and return to the original main
window, click the
X
button in the upper right corner.
Figure 29 Close Folder List
Click the
Vessel 3D-View
button to show an expanded "vessel window". The "vessel
window" will cover the whole screen like the figure below (here shown in Ghost mode). Click
the
Vessel 3D-View
button and then click the line
Seapath Configuration
to return to the
main window.
Figure 30 Vessel 3D-View, Ghost mode