Kongsberg Seatex Seapath 200, Installation Manual

Page: 124 / 130

Seatex Seapath 200 Installation Manual, rev. 13 Appendix D – Seapath configuration software, SCC
110
8.4.6.4 Load from file
Seapath parameters stored on file in the SCC computer can be loaded back into the workspace
area for further editing or/and downloaded to Seapath. In the Configuration Folder List, select
Parameter Management \ Load from file,
and the window below appears.
Figure 75 Load from file
Click the
Load from file
button, and the "standard open window"
Select file to open
parameters from
appears. Choose wanted location and click
Open
.
8.4.6.5 Undo
If the editing of Seapath parameters for some reason fail, it is possible to overwrite the SCC
workspace with the last saved parameters from Seapath at any time. In the Configuration
Folder List, select
Parameter Management \ Undo
and the window below appears. Click
Undo
to get the last saved parameters.
Figure 76 Undo