Koncar SE 5604 SERIES, Operating, Installation And Connecting Instructions

Page: 72 / 187

EN
72
Table 10 - Nozzles
Burners
Rated load
kW
Nozzles for liquefied
petroleum gas
(propane-butane)
G30
Nozzles for natural
gas G20
G30 gas flow
rate g/h
Small
(Def./Somip./San.)
1,00 50/52/52 77/72/72 72
Medium
(Def./Somip./San.)
1,75 66/65/65 101/87/97 125
Large
(Def./Somip./San.)
3,0 87/88/88 129/117/117 215
Each nozzle is marked with a number indicating the nozzle dia in hundredths of millimetre
Installation of the connector and seal for liquefied petroleum gas (Figure 39)
1 - To the gas outlet on the cooker (1) connect the gas
connector (3) with seal (2).
2 - Connect prescribed rubber hose to the LPG connector
(3).
3 - Check the connection points for tightness (primarily by
means of a pressure gauge and use soap solution to
check for leakage).
Before proceeding with the connection of the cooker to a
LPG cylinder, read carefully the instructions for the use of
the cylinder and the respective pressure control and make
sure that the hose does not come in contact with the rear
wall of the cooker.
Figure 39