Model 919A
Automatic Gravity Feed Slicer
Item #
Standard Features
➤
2-speed, 1/2 HP, totally enclosed and permanently
lubricated knife motor
➤
2-speed, automatic carriage; low speed is 40 SPM,
high speed is 60 SPM
➤
Furnished in 115/60/1, 5.5/4.5 amp, AC, ETL listed; also
available in 1/3 HP, 230/60/1, 2.9 amp, AC, ETL listed
➤
Low 12/5 VDC circuitry for added operator protection
➤
Finish is stainless steel and sanitary burnished aluminum;
unit disassembles quickly without tools for easy cleaning
➤
Nominal 12-1/2” (318 mm) diameter, hollow ground,
hardened and polished forged stainless steel knife
➤
The carriage handles food up to 11” (280 mm) wide,
by 6” (152 mm) high or 8” (203 mm) diameter
➤
Rear-mounted, stainless steel meat pusher extends over
the entire length of the product table; a fence is provided
to control the product on the table
➤
Precise slice adjustment to a thickness of
27/32” (21 mm)
➤
Ergonomic style handle for ease of use
➤
Built-in, top-mounted, two stone knife sharpener with
single lever, dual-action system
➤
Permanent, tapered knife ring guard covers non-slicing
portion of knife even when the sharpener and center
plate are removed
➤
Center plate interlock prevents the slicer from running
when center plate is removed
➤
No-Volt release prevents activation of the slicer in
the event of power interruption; operator must
restart the slicer
➤
Gauge plate interlock prevents removal of the product
table until it is in the full forward or home position and the
gauge plate is fully closed; once table is removed, gauge
plate cannot be reopened
➤
Built-in timer automatically shuts the slicer off after15
seconds of non-use
➤
Q-P-Q nickel plated transport slide rod with reservoir wick
for reduced wear
➤
On/off, 3-position, moisture protected switch, with power
light
➤
Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle
Options
❏
1/3 HP, 230/60/1, 2.9 amp, AC, ETL listed
Automatic Gravity Feed Slicer
Model 919A
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form #SPC10-0902N
Safety and Convenience Features
Berkel Model 919A automatic gravity feed slicer features
Berkel’s time proven hollow ground stainless steel knife,
built-in, single lever, dual-action sharpener and many safety
features. The permanent, tapered guard covers the non-
slicing portion of the knife even when the sharpener and
center plate are removed. The gauge plate interlock
prevents the product table from being removed unless
it is in the full forward or home position and the gauge
plate is closed. Removing the product table locks the
gauge plate in the closed position. The center plate
interlock prevents the slicer from operating if the center
plate is removed. A built-in timer automatically shuts off
the unit after 15 seconds of non-use. The unit is easy to
clean and disassembles quickly without tools.
Approved By:
Date
Accessories
❏
Stainless steel vegetable
❑
4” Extension NSF
chute with pusher
legs (set of 4)
❏
Skewers with coring tool
❏
SURE-LOCK LIFT™
❏
Sharpening kit
❏
Slaw tray
❏
Receiving tray
❏
Juice cup
❑
Product fence
C
Model 919A
