Form #SPC10-0902N
Made in the U.S.A.
© 2002 Berkel Company Litho in U.S.A.
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Automatic Gravity Feed Slicer
Model 919A
Model 919A
Automatic Gravity Feed Slicer
Specifications
Motor:
2-speed,1/2 HP, totally enclosed, permanently
lubricated ball bearings, thermally protected.
Carriage:
2-speed, automatic carriage; low speed is
40 SPM, high speed is 60 SPM.
Electrical:
Furnished in 115/60/1, 5.5/4.5 amp, AC,
ETL listed. Also available in 1/3 HP, 230/60/1, 2.9 amp,
AC, ETL listed. Low 12/5 VDC circuitry for added
operator protection.
Finish/construction:
All food contact areas are
stainless steel including the pusher, gauge plate,
product table, center plate and knife; sanitary burnished
aluminum ring guard and one-piece base with non-slip
feet. Slicer disassembles quickly without tools
for easy cleaning.
Knife:
Nominal 12-1/2” (318 mm) diameter, hollow
ground, hardened and polished forged stainless steel.
Cutting Capacity:
Carriage handles food up to
11” (280 mm) wide by 6” (152 mm) high or 8”
(203 mm) diameter. Product fence is standard.
Slice Thickness:
Precision gear system with eccentric
gear to prevent backlash, provides infinite slice adjust-
ment and consistent cuts of hard or soft foods from
tissue thin to 27/32” (21 mm).
Full Gravity Feed:
Full 45
°
angle feed requires less
mechanical pressure. Equipped with stainless steel,
rear-mounted pusher that covers the entire length of the
product table to hold product and minimize waste. An
optional screw-in weight is also available. Ergonomic
style handle for ease of use. A fence is standard.
Knife Sharpener:
Built-in, top-mounted, two stone,
single lever, dual-action system for a lasting,
razor-sharp edge. Unit is removable and submersible
for easy cleaning.
Knife Ring Guard:
Permanent, tapered guard covers
non-slicing portion of knife edge even when the
sharpener and center plate are removed.
Center Plate Interlock:
Deactivates the slicer when center
plate is removed. Slicer will not run.
Gauge Plate Interlock:
Prevents removal of table until
gauge plate is closed and the product table is in the full
forward or home position. Once product table is removed
the gauge plate is locked and cannot be opened.
No-Volt Release:
Prevents activation of the slicer in the
event of power interruption. Operator must restart slicer.
15 Second Timer:
Built-in timer automatically shuts off the
slicer after 15 seconds of non-use.
On/Off Switch:
Highly reliable, moisture resistant,
3-position switch with power light.
Q-P-Q Nickel Plated Transport Slide Rod with Reservoir
Wick:
E-nickel plated rod undergoes Q-P-Q impregnation
increasing the lubricity of the stainless steel, reducing wear
properties of the rod and bushings.
Cord and Plug:
Attached 6-foot, flexible, 3-wire cord and
plug for grounded receptacle.
Warranty:
All parts, service and travel coverage for one
year, excluding wear items.
As we continually strive to improve our products, specifications
are necessarily subject to change without notice.
Model No. Cutting Slice Knife Slicing Product Dimensions
Capacity Thickness Diameter Speed
Width A Depth B Height C
919A
11” (280 mm) wide to 27/32” 12-1/2” low-40 SPM 20” 29” 24”
6” (152 mm) high (21 mm) (318 mm) high-60 SPM (508 mm) (737 mm) (610 mm)
8” (203 mm) dia.
Motor
Electrical
Weight
Box Dimensions
Width
Depth
Height
2-speed
115/60/1
Net 114 lbs. (52 kg)
32”
30”
30”
1/2 HP
Ship 160 lbs. (73 kg)
(813 mm)
(762 mm)
(762 mm)
A
B
C
