Komatsu PC1250-11, Original Instructions Manual

Page: 77 / 452

End screen when any message has been re-
ceived
If there is any message from your Komatsu distributor, it is dis-
played on the end screen.
In this case, turn the starting switch to ON position to re-check
the message, and if the message is requesting a response,
make a reply to it.
BASIC OPERATION OF MACHINE MONITOR WHEN STARTING SWITCH IS ON
WHILE OPERATOR ID INPUT IS SET
• If inputting ID number for operator identification function (with SKIP) is set, the starting screen GG switches
to ID number input screen LL (with SKIP) when the starting switch is turned to ON position.
• If inputting ID number for operator identification function (without SKIP) is set, the starting screen GG
switches to ID number input screen MM (without SKIP) when the starting switch is turned to ON position.
• On the ID number input screen LL (with SKIP) or MM
(without SKIP), input the already registered ID number,
and press the switch F6. The screen changes to the check
before starting screen BB. If you input an incorrect ID num-
ber, press the switch F5, and clear an input character at a
time.
OPERATION EXPLANATION OF COMPONENTS
3-11