Komatsu PC1250-11, Original Instructions Manual

Page: 109 / 452

1.
When the working mode selector switch (1) is pressed, the
working mode selector screen is displayed on the monitor.
2.
Press the F2 switch at the bottom of the screen to switch
on or off the swing priority mode.
(Example: When the swing priority mode is turned on)
If no switch is touched for more than 5 seconds, the select-
ed working mode is automatically set as the working
mode. The screen changes to the one for the steps 3
and 4.
REMARK
To return to the standard screen without changing the
swing priority mode, press the switch F5.
3.
After selecting the swing priority mode, press the switch F6
and the mode is displayed in the center of the monitor dis-
play.
(Example: When the working mode is P+ mode)
4.
The working mode display at the top right of the screen is
highlighted in yellow after 2 seconds.
5.
The screen returns to the standard screen after 2 seconds.
The working mode display highlighted in yellow in step 4
returns to blue.
OPERATION EXPLANATION OF COMPONENTS
3-43