Komatsu PC1250-11, Original Instructions Manual

Page: 150 / 452

If “SKIP” is selected when the starting switch is turned to ON
position, “****” is displayed in “Operator ID” column on “Monitor
Setting” menu screen.
1.
Select “Operator ID” (5) on “Monitor Setting” menu screen,
then press the switch F6 for 1 second.
2.
“Operator ID Change” screen is displayed.
• Input the already registered ID on “Operator ID
Change” screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to “Monitor Setting” menu screen.
The inputted ID is displayed at “Operator ID” column
on “Monitor Setting” menu screen.
• When you press the switch F1 on “Operator ID
Change” screen, a message is displayed below and
the screen changes to “Monitor Setting” menu screen.
On “Monitor Setting” menu screen, as the same way
when the starting switch key is turned to ON position
and “SKIP” is selected, “****” is displayed in the col-
umn of “Operator ID”.
In this case, the operator ID becomes unidentified.
EXPLANATION OF COMPONENTS OPERATION
3-84