Komatsu PC1250-11, Original Instructions Manual

Page: 129 / 452

SWITCH DISPLAY/NON-DISPLAY OF ECO GAUGE
The setting of Display/Non-display of ECO gauge (7) can be
changed.
1.
Select “ECO Gauge Display” (8) on “Configurations”
screen, then press the switch F6.
2.
“ECO Gauge Display” setting screen is displayed.
ON: Displays the ECO gauge (7) on the standard screen.
OFF: Does not display the ECO gauge (7) on the standard
screen.
On this setting screen, you can perform the following opera-
tions with switches F3 to F6.
F3: Moves to the next item (1 line below). When it is on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is on the
first line, it moves to the last line.
F5: Cancels the setting change and returns the screen to “Con-
figurations” screen.
F6: Changes the setting and returns the screen to “Configura-
tions” screen.
SET TARGET FUEL CONSUMPTION VALUE DISPLAYED IN ECO GAUGE
It is possible to change the target fuel consumption value (the upper limit value of the green range) of the ECO
gauge .
1.
Select the ECO Gauge Target Value (9) from the Configu-
rations screen, then press switch F6.
2.
ECO Gauge Display Fuel Target Value appears.
OPERATION EXPLANATION OF COMPONENTS
3-63