127
20 SETTING IN MEMORY MODE
Memory Mode Screen ·
To enter Memory Mode, press MEM in the “Status
Screen”
·
In Memory Mode, it is possible to perform settings
concerning JOB and memory.
·
JOB selection
·
Deleting a JOB
·
Registering Coordinate Data in Memory
Clearing Coordinate Data from Memory
·
Reviewing Coordinate data
·
Inputting codes
·
Reviewing codes
·
Outputting JOB data to the computer
20.1 JOB Selection
20.1.1 Current JOB Selection
Before recording data, select the JOB in which it is to be recorded. The following data can be recorded in JOB.
·
Measurement results ·
Instrument station data ·
Notes
PROCEDURE
Operating Procedure
Operation
Display
⑴
Select “1. JOB” in the “Memory Mode
Screen” and press ENT (or press numeric key 1),
the “JOB Management Screen” is displayed.
“1. JOB”
+
ENT
Mem./ JOB
1. JOB selection
2. Coord read JOB
3. JOB Export
4. Coord . import
5. comms output
⑵
Select “1. JOB Selection” then press ENT (or
press numeric key 1).
“1. JOB
Selection”
+
ENT
JOB selection
Job : J0B1
LIST OK
Memory
↑
1. JOB
2. Known data
5
3. Code
4. Define roads
5. U Disk Mode
↓
