168
Table 3
：
Screen Setting
Parameters
Option
（
*
：
Factory setting
）
Unit
Temperature
℃
*
℉
Air pressure
hPa *
mmHg
inHg
Angle
DEG *(360 degrees)
GON (400 gons)
MIL
Distance
M *
Ft
PROCEDURE
Operating Procedure
Operation
Display
⑴
In Measurement screen, press ESC to show
the status screen.
ESC
2020-01-01 10
：
00
：
48
KTS-442UT
No.S19996
Ver.2020-1.02
Job: JOB01
MEAS MEM CNFG
⑵
Press CNFG under the status screen, the
Setting Mode Screen is displayed.
CNFG
Config (1).
1. Obs. condition
2. Instr. const
3. Date & time
4. Comms setup
5. Unit
⑶
Select “1. Obs. condition” and press ENT to
show “Observation Condition Setting
Screen”. It is possible to check and change
the parameter settings. When “↑” or “↓” is
displayed, there are items above or below,
use ▲or▼ to scroll the screen. It is possible
to change the parameter setting of the current
line by using
or
key.
The following are the selected conditions.
(Those marked by an [*] are values set at the
factory)
“1. Obs.
condition”
+
ENT
Condition (1)
C&R crn: No
V. obs : Zenith 0
Tilt crn. : Yes(H&V)
Dist mode: SD ↓
Power off: off
Condition (2)
Coord: E-N-Z
Ang. Reso. : 5″ ↑
Coord. Search JOB:
JOB01
