134
20.1.8 Coordinate Import
It is to transfer coordinate data from USB pen drive to total station memory.
It is not allowed to transfer between two jobs which are all exisited in Local disk.
PROCEDURE
Operating Procedure
Operation
Display
⑴
Select “1. JOB” in the “Memory Mode
Screen” and press ENT (or press numeric key 1),
the “JOB Management Screen” is displayed.
Insert a USB pen drive which is loaded with
known coordinates.
“1. JOB”
+
ENT
Mem./ JOB (1)
1 JOB selection
2. Coord. read JOB
3. JOB Export
4. Coord. import
5. Comms Output
⑵
Select “4. Coord . import” then press ENT
(or press numeric key 4)
Imput the filename.
Or press LIST to enter Job list and choose job.
Then press ENT.
“4.
Coord .
import
”
+
ENT
Select a job
Job : J0B1
LIST OK
(3) Choose the CSV file from the USB pen drive.
JOB1. TXT
JOB1. SDR
JOB1. CSV
EXIT
⑷
The operation as right
Coord. Import
From B: \ JOB1. CSV
From A \ job1. Job
EXIT
Finishing
(5)Finish the imputting and return to previous
menu
Mem./ JOB (1)
1 JOB selection
2. Coord. read JOB
3. JOB Export
4. Coord. import
5. Comms Output
* 1. The data format to import should be: point name, code, E, N, Z, see sample below:
