118
⑻
Press <--> then press CRD. To display the
“SetOut guide screen.”
The angle value which displays on the seond
line is the difference of the measured angle
value and the required set-out value. The
arrow indicates the instrument should be
turned to which direction.
The distance value which displays on the third
line is the difference between the measured
value and the required distance setout value.
The arrow indicates the direction which the
prism should be moved to.
The height difference of the point to be set out
is displayed on the fourth line, The arrow
indicates the direction which the prism should
be moved to.
(If to show the values in coordinates format,
press <--> when the measurement is finished.
<-->
+
CRD.
Set Out
←
-36°13′46″
↓
-7.882
↑
-79.672
S-A 2.131 m
ZA 96°15′29″
HAR 331°13′46″
REC. SHV <--> CRD.
⑼
Rotate the EDM part of the instrument to
make the displayed value to be 0° (the second
line). When the difference of the measured
angle value and the required value is within
±30″, there are two arrows displayed on
screen.
·
The meaning of arrows
：
←: Move the prism to left.
→: Move the prism to right.
·Restore the “Set-Out Observation Screen”:
<-->
Set Out
← → 0°00′00″
↓
-7.882
↑
-79.672
S-A 2.131 m
ZA 96°15′29″
HAR 295°00′02″
REC. SHV <--> CRD.
⑽
Place a prism on the sight direction and sight
it.
Press CRD to start distance set-out
measurement.
·
Press SHV to select the Set-Out measurement
mode.
CRD.
Set Out
Set Out PSM = 0
PPM = 0
Fine’s’
STOP
⑾
Move the prism to make the displayed value
which is displayed on the third line be 0 m,
press CRD. to start measuring.
When the difference value between the
distance set-out value and the measured value
is within ±1cm, there are two arrows displayed
on the screen. (When the distance measuring
mode is repetition or tracking measurement, it
is possible to display the results directly after
Set Out
← → 0°00′00″
↑ ↓ 0.000
↑
-79.672
S-A 12.234 m
ZA 96°15′29″
HAR 295°00′02″
REC. SHV <--> CRD.
