117
⑷
Press LOFS(orROFS) to set out the left (or
right) side stake, the corresponding chainage,
offset, height difference will be displayed in
the screen.
It is possible to enter the chainage and offset
manually.
Offset is minus: the offset point is at the left
side of center line.
Offset is positive: the offset point is at the right
side of center line.
Alignment Setout
Chain
:
1000.000 3
Offs
:
-2.150
HtDi
:
-0.150
Tgt.h
:
2.000 m
P1
LOFS ROFS +CHG -CHG
⑸
When the required chainage and offset is
displayed, press ENT to confirm them. When
the cursor is in the bottom of the screen, press
ENT, the coordinate of the point to be set out is
displayed, press OK.
Alignment Setout
Np
:
8.888 m
Ep
:
199.200 m
Zp
:
80.000 m
OK
⑹
When the “Set Out screen” is displayed,
sightthe prism, press SHV key to display the
CRD key.
SO.H
:
the distance to the point to be set out
dHA
:
the horizontal angle difference to the
point to be set out
SHV
Set Out
SO
.
H m
H-0 m
ZA 96°15′29″
HAR 331°14′35″
dHA -36°14′35″
REC SHV <--> HD
⑺
Sight the prism and press CRD.
When the measurement is finished, the
“Setting-Out Obsevation screen” is displayed.
CRD
Set Out
Set Out PSM = 0
PPM = 0
Fine’s’
STOP
Set Out
SO
.
N -2.369
E 8.044
Z -79.672
ZA 96°15′29″
HAR 331°13′46″
dHR -36°14′35″
REC. SHV <--> CRD.