139
⑵
Select “1. Key in coord” and press ENT, the
“Coordinate Data Entry Screen” is displayed.
Press ADD to set the following items:
N, E, Z coordinate values, point name, code.
After each entry press ENT.
“1. Key in
coord”
+
ENT
+
ADD
N: 110.000m
N: 100.000m
N: 10.000m
Pt.: 001
Code: KOLIDA
REC
⑷
Press REC to record the coordinate value
into memory, next it is possible to enter
other coordinate data.
After the registration of all the coordinate data
has been completed, press ESC to return to
the “Known Point Menu Screen”.
·
Maximum point number size: 14 characters
REC
+
ESC
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
NOTE
：
Coordinates input range: -99999999.999 to +99999999.999 (m)
20.2.2 Known Coordinate data import
It is to import data (.txt file) from SD card to a specified file in Local Disk.
PROCEDURE
Operating Procedure
Operation
Display
⑴
Select “2. Known data” in “Memory Mode
Screen” and press ENT(or press numeric key
2), the “Known Point Menu Screen” is
displayed.
“2. Known
data”
+
ENT
Mem./ Known
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
⑵
Select “2. Coord import” and press ENT, to
enter the display for coord import, input or import
the data job name. (or press LIST to choose
the .txt file in SD card).
Press OK.
“2. coord
import”
+
ENT
File import
Job
LIST OK
⑵
Import starts now.
Data import accomplihed
Import cood
From B:\ JOB1.TXT
To A
：
\ coord.PTS
QUIT
