119
sighting the prism.)
↓ : Move the prism to the station point direction.
↑ : Move the prism away to the station positon.
⑿
Press CRD., move the prism up or down to
make the displayed height difference value to
be 0 m(When the value is near to 0 m, there
are 2 arrows displayed on the screen). When all
the values which display on the 2
nd
, 3
rd
, 4
th
lines are 0, the current position is the required
position. The meaning of the arrow:
↑
：
Move the prism up ↓
：
Move the prism
down
Set Out
← → 0°00′00″
↑ ↓
0.000
↑ ↓
0.003
S 12.554
ZA 96°15′29″
HAR 295°00′02″
EDM SHV <--> CRD.
⒀
Press [ESC] key to the “Chainage and Offset
Setting Screen”, set out the next point from
step 4.
Alignment Setout
Chainage: 1000.000 3
Offset: -2.150
Height diff. -0.150
Tgt. h.: 2.000 m
P1
LOFS ROFS +CHG -CHG
Note:
Any time press [ESC] key to the “Chainage and Offset Setting Screen”, it is possible to input a new point and
perform setting-out. To return to previous screen, press [ESC] key on the “Point Number Screen.”
It allows to change Target Height by pressing the key FNC.
Explanation for the main set out screen:
F1 F2 F3 F4
SLOPE:
The key is used in slope set out. (Press
FNC
key)
LOFS:
The key is use in setting out the left side stake. Press it to display the offset and the height difference
Alignmet Setout
Chain
：
1000.000 3
Offset
：
0.000
Ht Diff
：
0.000
Tgt. h
：
0.000 m
P1
LOFS ROFS +CHG -CHG
SLOPE
